Download Cisco SPA 112 User Manual for Free
Download Adapter Instruction Manual of Cisco SPA 112 for free from ManualsDB.
CISCO SPA 112. USER GUIDE. Downloaded from www.manualsdb.com manuals search engine WHAT’S IN THIS GUIDE. Set up Got everything? 3 Setting up 3 Check that you’re set up for the Cloud Voice Service 4 General information NEED HELP? If you have any problems setting up or using your Polycom IP Phone, contact the IP Comms Service Hub on 0800 389 0537 5 999 or 112 emergency calls. EMERGENCY CALLS. Your BT Cloud Voice phone number is registered to a specific address, so when you make a 999 or 112 call from your phone number, that’s the address the emergency services will see. If you use your BT Cloud Voice service at a different address, the registered address does not automatically change. So if your work location changes let your BT Cloud Voice service administrator know as they might also need to change your registered address. You might not be able to make 999 or 112 calls when there’s a power or network failure or if using the service through an app on a mobile device. Downloaded from www.manualsdb.com manuals search engine SET UP. This booklet is here to help you get started with your new analogue terminal adaptor. It’s very easy to set up and it won’t take you long – just follow the simple instructions below or have a look at the quick start guide instead Got everything? • Cisco SPA 112 Phone Adaptor • Ethernet Cable • Mains power adapter and UK Plug • Phone Socket Adaptor Setting up. Note: The Cisco SPA 112 does not support PoE (Power over Ethernet), so it will need to be plugged into the mains. The first thing to do is connect the Internet Port (shown blue below) to your network port using the Ethernet cable provided. Then connect the power unit supplied to the DC 5V Power outlet on the adaptor (shown below) and to a mains supply. Finally, connect your analogue phone to the Phone 1 socket (below) using either the supplied adaptor or directly if your phone has an Rj11 telephone cable. Power supply Ethernet connection Phone socket 3 Downloaded from www.manualsdb.com manuals search engine SET UP. Check that you’re set up for the Cloud Voice Service. Please note that during any future upgrades or changes the same sequence may take place. Your adaptor will be pre-loaded with all the information it needs to set up the Cloud Voice Service without you doing anything. 1. Once your phone is connected to the network, it will do a series of firmware updates. It will need a little bit of time to do this, so please be patient. 2. When everything is complete and ready to go, one of the two top Phone Port LEDs (as shown below) will illuminate green. If this doesn’t happen, please call us on 0800 389 0537. Phone port LED’s Network indicator Power indicator Your Cisco SPA 112 is now ready for use! 4 Downloaded from www.manualsdb.com manuals search engine GENERAL INFORMATION 999 or 112 emergency calls Product disposal instructions • Your BT Cloud Voice phone number is registered to a specific address, so when you make a 999 or 112 call from your phone number, that’s the address the emergency services will see. If you use your BT Cloud Voice service at a different address, the registered address does not automatically change. So if your work location changes let your BT Cloud Voice service administrator know as they might also need to change your registered address. The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life. • You might not be able to make 999 or 112 calls when there’s a power or network failure or if using the service through an app on a mobile device. Safety information • Do not open the handset or the base. This could expose you to high voltages or other risks. Contact the IP Comms Service Hub on 0800 389 0537 for all repairs. Cleaning • Clean the handset and base with a damp (not wet) cloth, or an anti-static wipe. Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock. Environmental • Do not expose to direct sunlight • Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surfaces • Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms • Do not expose your product to fire, explosive or other hazardous conditions • There is a slight chance your phone could be damaged by an electrical storm. The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment, treat any hazardous substances and avoid the increasing landfill. Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal. Guarantee Your IP Phone is guaranteed for a period of 12 months from the date of purchase. Subject to the terms listed below, the guarantee will provide for the repair of, or at BT’s or its agent’s discretion, the option to replace the Phone or any component thereof, (other than batteries), which is identified as faulty or below standard, or as a result of inferior workmanship or materials. Products over 28 days old from the date of purchase may be replaced with a refurbished or repaired product. The conditions of this guarantee are: • The guarantee shall only apply to defects that occur within the 12-month guarantee period • Proof of purchase is provided • The equipment is returned to BT or its agent as instructed • This guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents • This guarantee does not affect your statutory rights. 5 Downloaded from www.manualsdb.com manuals search engine Offices Worldwide The services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2014. Registered office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000. PHME 72027 Downloaded from www.manualsdb.com manuals search engine