Download Ryobi RBL1802Li4 Original Instructions Manual for Free
Download Blower Instruction Manual of Ryobi CBL1802 for free from ManualsDB.
ORIGINAL INSTRUCTIONS 18V ONE+ Cordless Blower RBL1802Li4 CBL1802 Downloaded from www.manualsdb.com manuals search engine Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Downloaded from www.manualsdb.com manuals search engine Fig. 1 1 2 3 Fig. 2 Fig. 3 1 4 2 1 3 Downloaded from www.manualsdb.com manuals search engine 5 Fig. 4 Fig. 5 2 Downloaded from www.manualsdb.com manuals search engine Safety RULES FOR SAFE OPERATION Your blower has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of trouble-free performance. Thank you for buying a Ryobi product. WARNING When using battery operated tools basic safety precautions should always be followed to reduce the risk of fire, leaking batteries and personal injury, including the following. Read all these instructions before operating this product and keep for future reference. ■■ Do not allow children or untrained individuals to use this unit. ■■ Wear heavy long trousers, non-slip safety footwear and gloves. ■■ Never operate unit while bare foot or wearing open shoes. ■■ Do not wear loose clothing, or jewelry that might get entangled in this unit. ■■ Do not touch the fan when operating this unit. ■■ Keep all bystanders, children, and pets at least 15m (50 feet) away. Remember that the operator or user is responsible for accidents occurring to bystanders, their property, as well as themselves. ■■ Check for damaged parts. Before further use of the appliance, any part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. ■■ Check for breakage of parts and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center. Following this rule will reduce the risk of shock, fire,or serious injury. ■■ Do not force the product. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. ■■ Do not over-reach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the product in unexpected situations. ■■ Secure long hair so it can not become entangled in moving parts or air intake. ■■ Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication. ■■ Do not operate in poor lighting. ■■ Never let anyone use your unit who has not received adequate instructions in the unit’s proper use. ■■ Keep the handles dry and clean. ■■ Consider work area environment. Do not expose power tools to rain. Do not use power tools in damp or wet ■■ ■■ ■■ ■■ ■■ locations. Keep work area lit. Do not use power tools where there is risk to cause fire or explosion. Store battery or idle tools. When not in use, tools and batteries should be stored separately in dry, high or locked up areas out of reach of children. Ensure that battery terminals cannot be shorted by other metal parts such as screws, nails, etc. Disconnect the tool from its battery pack when not in use, disconnecting the blower tube before service. Avoid unintentional starting. Do not carry the tool with a finger on the switch. Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired. Have your tool repaired by a qualified person. This tool is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user. ￼ WARNING Use only the manufacturer’s replacement parts. Failure to do so may cause poor performance, possible injury and may void your warranty. BATTERY TOOL USE AND CARE ■■ Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents. ■■ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. ■■ Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. ■■ When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. ■■ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns. SAVE THESE INSTRUCTIONS. REFER TO THEM FREQUENTLY AND USE THEM TO INSTRUCT OTHERS WHO MAY USE THIS UNIT. IF YOU LOAN SOMEONE THIS UNIT, LOAN THEM THESE INSTRUCTIONS ALSO. 1 Downloaded from www.manualsdb.com manuals search engine Safety ADDITIONAL SAFETY RULES ￼ WARNING The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product. ASSEMBLING THE BLOWER TUBE See Figure 2. ■■ With the logo area facing up, slide the blower tube over the outlet on the blower housing. ■■ Press down on the tab on the blower housing outlet. ■■ Push tab on outlet on the blower housing down until it locks into place through the opening in the blower tube. OPERATION WARNING Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. INTENDED USE You may use this tool for the purposes listed below: ■■ Clearing hard surfaces such as driveways and walkways. ■■ Keeping decks and driveways free from leaves and pine needles. WARNING Not intended for use other than what's listed above. TO INSTALL BATTERY PACK See Figure 3. ■■ Place the power switch in the OFF ( O ) position. ■■ Place the battery pack in the blower. Align raised rib on battery pack with groove in the blower’s battery port. ■■ Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the blower before beginning operation. CAUTION DESCRIPTION REFER TO FIGURE SHEET 1. Blower housing outlet 2. Power switch 3. Blower tube 4. Latches. 5. Battery pack KNOW YOUR BLOWER See Figure 1. The safe use of this product requires an understanding of the information on the blower and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BLOWER TUBE The blower tube can be installed on the blower without using any tools. ASSEMBLY When placing battery pack in the blower, be sure raised rib on battery pack aligns with the back of the blower and latches into place properly. Improper installation of the battery pack can cause damage to internal components. TO REMOVE BATTERY PACK See Figure 3. ■■ Place the power switch in the OFF ( O ) position. ■■ Locate latches on side of battery pack and depress both sides to release battery pack. ■■ Remove battery pack from the blower. STARTING /STOPPING THE BLOWER See Figures 4. ■■ To start the blower, place the power switch in the ON ( l ) position. ■■ To stop the blower, place the power switch in the OFF ( O ) position. WARNING WARNING To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the blower when assembling parts. 2 Downloaded from www.manualsdb.com manuals search engine Battery tools are always in operating condition. Therefore, switch should always be in the OFF position when not in use or carrying at your side. Safety OPERATING THE BLOWER See Figure 5. ■■ To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a pile. ■■ To reduce sound levels, limit the number of pieces of equipment used at any one time. ■■ Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen surfaces when water is available. ■■ Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens. ■■ Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away. ■■ After using blowers or other equipment, CLEAN UP! Dispose of debris properly. children. Keep away from corrosive agents such as garden chemicals and de-icing salts. ENVIRONMENTAL PROTECTION Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling. SYMBOL Safety alert Please read the instructions carefully before starting the machine. Do not expose to rain or damp conditions. WARNING When servicing use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. Wear ear protection. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. Wear eye protection. Beware of thrown or flying objects. Keep all bystanders at least 15 m away. WARNING Do not at any time let brake fluids, gasoline, petroleum based products, penetrating oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic. WARNING Rotating Fans. Keep hands and feet out of the openings while the machine is running. 96 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance. STORING THE BLOWER Guaranteed sound power level. The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL DANGER: MEANING Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Clean the blower thoroughly before storing. Store the blower in a dry, well-ventilated place that is inaccessible to 3 Downloaded from www.manualsdb.com manuals search engine Safety Indicates a potentially hazardous situation, which, WARNING: if not avoided, could result in death or serious injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. 20130227v1 CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. 4 Downloaded from www.manualsdb.com manuals search engine PRODUCT SPECIFICATIONS Model RBL1802Li4 CBL1802 Motor 18V Air Velocity Measured sound pressure level Measured sound power level Vibration 190 km/h LpA: 83 dB(A), KpA: 2 dB(A) LWA: 93.7 dB(A), KWA: 2 dB(A) ah: 1.57 m/s2, K: 1.5 m/s2 Weight with Battery Pack Battery Pack 2.2 kg 1 x RB18L40 Not included Compatible Battery Packs ABP1801 / ABP1802 / BPL-1815 / BPL-1820 / BPL-1820G / RB18L13 / RB18L15 / RB18L26 / RB18L40 Charger 1 x BCL14181H Compatible Chargers BCL-1800 / BCL1418 / BCL14181H / BCL14183H (for all compatible battery packs) Not included 20130227v1 ACR-1800 (only for ABP1801 / ABP1802) Downloaded from www.manualsdb.com manuals search engine Downloaded from www.manualsdb.com manuals search engine Downloaded from www.manualsdb.com manuals search engine Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 27 Clemow Drive Mt. Wellington, Auckland 1060, New Zealand 960732014-01 Downloaded from www.manualsdb.com manuals search engine